Print to product and on-demand with our scarf printing and hemming service.


Our complete in-house scarf printing and hemming service

hem circle

Ready to wear

Choose from our range of hemming services for a complete print-to-product service.

in-house finishing

We have a team of experienced seamstresses that take meticulous care when preparing your scarves. Their attention to detail makes each scarf unique.

hand sewn labels

All our 100% silk scarves include an optional woven care label, hand sewn into the seam.
Other fabric composition labels may also be available.


Each scarf is pressed and packed in a clear cellophane bag. The sealed bags are great for protecting the scarves during shipment and storage. You can then choose to package the product yourself, or to sell it as is.

Expert quality scarf finishing.

Scarf Hemming Service

If you are interested in having a scarf printed and hemmed all at the same time, we can offer you a variety of finishes. Choose the option best suited to your design for a neat and elegant edge, so that you can tie or wrap the scarf as you wish.

things to consider

Please request hemming when you place your scarf print order. We cannot accept returned unfinished scarves after an order has been shipped.

Get in-touch for our current turnaround times as these do vary throughout the year.

The scarves will be returned to you with finished edges, including your label and a fabric care label sewn in, where available and if requested.

The care label will say ‘Dry Clean Only – Made in the UK’ and include the composition of the fabric type.

Each scarf will be individually pressed and packed in a clear cellophane bag. 

Remember to send your labels with the order and a drawing if you would like the labels sewn in a particular position on the scarves. Labels will normally be placed 3–7cm away from corners on scarves, unless otherwise instructed.

Details of our finishes

Our hemming types

A minimum of 1cm is needed within the design size as your hemming allowance on all four sides of the scarf to achieve a standard machine finish. That is 1cm at the top, 1cm at the bottom, 1cm on the left side and 1cm on the right side.

Please note that on all Pin Hemmed scarves the machine stitch runs over all four corners and is therefore a faster service.

This style of hemming provides a consistent, flat edge. Hemming is always carried out using a matching thread as close to the design colours within the scarf as possible, unless otherwise requested.

Pin Hem Allowance

A minimum of 1.5cm is needed within the design size as your hemming allowance on all four sides of the scarf to achieve a standard roll finish. That is 1.5cm at the top, 1.5cm at the bottom, 1.5cm on the left side and 1.5cm on the right side.

Please note that on all Roll scarves there are elements of hand finishing involved. We always hand roll the corners, fix any slipped stitches and sew in labels by hand. These personal touches do create longer lead times for all orders, particularly for orders of over 50 units.

Hemming is always carried out using a matching thread as close to the design colours within the scarf as possible, unless otherwise requested.

NOTE: Hand Finished Roll hemming is not suitable on a scarf that has an angled hem.


You do not need to add a border to your scarf unless you want to. It is not a Silk Bureau requirement.

We strongly advise against rolled coloured edge hemming on the Roll option. Due to the nature of the fabric and how it moves whilst printing and processing, there may be an irregular line and visible hem stitching from the front side. If there hasn’t been enough allowance left, we cannot be held responsible for the lack of consistency of the line.

We do recommend that you source independent hand rolled hemming for this type of finish.

Machine Roll Hem Allowance

We cannot fringe all fabrics, please check prior to ordering.

To fringe a scarf, a single thread is pulled through the weave to provide a straight guide. The rest of the threads are then carefully removed to create a neat fringe.

In cases where the fabric is just slightly off the grain, it will be evident in relation to a solid border. A constant depth of fringe can only be achieved by cutting into the thread repeatedly along its length. However, this staggered line may not be attractive.

The Pin Hem and Eyelash Fringe options can be combined on a scarf. This is particularly effective on a long scarf where fringes are added on opposite short ends and pin hems on opposite long sides.

fringe and pin hem

Combine the fringe hem with a pin hem along the longer side of your scarf.

fringe and roll hem

Combine the fringe hem with a roll hem along the longer side of your scarf.


If you would like a deeper fringe, please let us know when ordering. Unless otherwise specified, we will fringe to 1cm depth.


You should not add a cutting line for the edges that require a fringe. You should only add a cutting line for the edges that are to be pin hemmed or roll hemmed.


This method of finish is best suited to an overall design that runs from edge to edge. This will avoid obvious signs of skew that may occur in the fabric. 

We recommend that you do not use a narrow border in your design when using this method of finishing. Eyelash Fringing is a very delicate technique that requires your design to align to the warp and weft of the fabric. As this is an extremely difficult and precise position at the printing stage and is virtually impossible to achieve.

If you would like a border, it should be at least 5cm deep. By adding a deeper border at the edges, you will get a more visually satisfying result and provide more tolerance for cutting and hemming.

Getting the weave of the fabric exactly square is practically impossible. Having a border around the edge of the scarf will emphasize the skew of the fabric. Borders look great on machine hem finishes, but not fringed ones. Our video for best practice highlights the issues. See Common Faults on our FAQ’s page.


If you select an eyelash fringe finish for your scarf, please remember to place your signature or logo at least 5cm from the edge of your design. 

fringe hem

Whether you choose a single-bagged or double-bagged option, these double-sided scarves are a substantial alternative to the traditional scarf.

Bagged Hem

Single Bagged Option

We recommend an allowance of 1cm on four sides of a design. The design is folded in half with the patterned side together. The three open sides are sewn, leaving a small gap at one end, creating a bag! This is then turned through the opening and either hand finished or machine straight stitched to close.

The scarf is then pressed to provide a knife edge finish.

Double Bag Hem

Double Bagged Option

We recommend an allowance of 1cm on all four sides of both front and back designs for this type of finished scarf.

With the design sides facing each other, all four sides are sewn together with a straight stitch leaving a small gap at one end, creating a bag! This is then turned through the opening and either hand finished or machine straight stitched to close.

The scarf is then pressed on both sides to provide a knife edge finish.



Our seamstresses have an expert knowledge of all our fabrics and how each can best be hemmed. But, not all fabrics are suitable for all of our hemming options. When using our scarf printing and hemming service, please see which fabrics are best for which finishes.

FabricWeightPin HemHF RollEyelash fringe
Silk Satin 1043X
Silk Chiffon 1043X
Silk Light Satin54X
Silk Triple Georgette82X
Silk Dupion54X
Silk Chiffon 626X
Silk Double Georgette70X
Silk Satin70X
Silk Single Georgette43
Silk Twill61
Silk Twill 1880
Silk Satin Chiffon39X
Silk Habotai43
Silk Heavy Habotai82 X
Silk Light Crepe de Chine43X
Silk Sandwashed Habotai70 XX
Silk Light Twill43
Silk Crepe De Chine61
Silk Peachskin Crepe De Chine61
Silcott Habotai59 X
Silcott Voile39X
Silcott Light Satin54
Silcott Heavy Satin122XX
Silk Modal56
Silk Wool Fine Rib57
Wool Fino55
Cotton Voile70X
Cotton Summerset80X
Cotton Vera42X
Cotton Fine Twill165XX
Cotton Bonito165XX
Cotton Poplin130XX
GOTS ECO Cotton Voile85X
GOTS ECO Non Optic Cotton Poplin136XX
GOTS ECO Cotton Twill155XX
GOTS ECO Cotton Light Sateen120XX
GOTS ECO Cotton Light Twill120XX
ECO Cotton Hem Fine Slub152XX
Poly Spandex Crepe153XX
Poly Lurex68X
Poly Crepe De Chine85X
Poly Satin110X
Poly Chiff Sat90X
Poly Chiffon48X
Poly Jacquard Spot78XX
Poly Organza65XX
Poly Volume Texture Satin105X
Poly Volume Charmeuse85X
Poly Volume Flat156XX
Poly Volume Dobby120XX
Poly Volume Mouseline70X
Poly Volume Soft Sateen80X
Poly Volume Cavalry Twill86X
Poly Volume Habotai80XX
FR Contract Organza50XX
FR Contract Voile70XX
Regenesis Crepe De Chine100X
Regenesis Chiffon98X
Regenesis Light Satin90X
Regenesis Twill96X
Regenesis Habotai80X

Here is a guide to some of the most popular hemming sizes requested by our customers and the cost of each hemming type. If you would like a quote on a scarf size not listed below, please get in touch.

The cost of the fabric and printing is in addition to these prices. Our current price list is available by contacting

Artwork SizePin HemHand Finished Roll Hem
33 x 33 cms£3.49£4.36
45 x 45 cms£3.90£4.88
60 x 60 cms£4.20£5.25
90 x 90 cms£5.10£6.38
120 x 120 cms£5.83£7.29
134 x 134 cms£6.46£8.08
45 x 180 cms£5.61£7.01
68 x 220 cms£6.91£8.64
134 x 180 cms£7.51£9.39

Making a single bagged scarf:

How to get the best results

Some design Tips

If an even reverse colour is important on your scarves, it is best to select a lighter weight fabric from our range. By having a loose weave and a thinner fabric, the colour will penetrate the fibres onto the reverse side of the scarf better.

Hint: Popular fabric choices are Light Satin, Single Georgette, Habotai and Light Crepe de Chine and Twill. Our suggested fabrics have been chosen for their good colour penetration and drape when worn.

See all our fabrics here.

Our experienced print operators are practised in getting some pretty tricky fabric weaves to print very straight, however, silk is a natural fabric and the weave is sometimes irregular, especially on finer fabrics. This can occasionally be further distorted during the coating of the fabric. As the fabric comes directly off a roll, it is fed onto the printer and adheres to a permanent adhesive belt, at this stage the fabric cannot be manipulated or adjusted.

Prints, which have borders and straight lines are more at risk of distortion through weave movement than ones with all over patterns. Think about how you use borders and geometric designs within your artwork.

This is more likely to occur with lighter weight fabrics, like Chiffon, whose weft can vary dramatically throughout a roll.

During the digital textile printing process shrinkage occurs. This can vary according to fabric type and the processes involved in production.

When we know that your fabric order is intended for make scarves, we will pass it through our Stenter to bring it as close as possible to the original size of the artwork. You should plan on this additional step taking a little longer.

Here are some best practices to consider when designing for a scarf.

Of course the size and dimension will dictate much of your design but also think about the finished article.

  • What sort of hemming are you planning?
  • What fabric will you choose?    
  •  Not all fabrics can be hemmed. Please check.
  • How will it be worn? Is it for day or evening wear?

Clear answers to all these questions will help you and us achieve the best results.


Not a good idea. Digital printing does not suit a block colour design, but it does suit multi-patterned, multi-coloured design. The slightest ink spot on a plain background (coloured or white) will be clearly visible and spoil the whole scarf. If your design contains block colour you will be asked to accept the risks involved. Although we take every precaution to avoid this happening, we cannot guarantee that one of the printing nozzles won’t release a tiny drop of ink, which would be very obvious on a block colour.

It’s a good idea to place your signature within the design of your scarf in case the label is cut out. After all, you want to receive the credit just like any artist does!

Its placement is important – don’t put it so close to the edge of your artwork that it gets caught up in the hemming.  We recommend a minimum of 2.5cm from the edge of your design and 5cm if you’re having fringe hemming.

signature allowance

We include free care labels with our scarf hemming service. These fabric care labels are hand sewn into the hem of your finished scarf. Dry clean only – Made in the UK will appear on the label.

If you would like to send us your own name or care label then please do so at the time of ordering. As part of the hemming service, we will hand sew these into the hem of your scarves. 

If you would like to have your labels sewn in a particular position on your scarf, please include a drawn diagram with approximate measurements. We will hand sew labels 3-7cm away from a corner, unless otherwise instructed. 

Borders can look great on a scarf. They can act as a frame around the artwork.

As straight lines and geometric shapes can be an issue in digital textile printing, so too can borders. Why not try a patterned border instead of a plain one?

If you would like to include a border on your scarves, please allow for the hemming. Remember we will need at least 1cm for the hem and so your border should never be less than 2cm. For a more dramatic border, make it even deeper. 


The total surface area of your scarf may include slight anomalies associated with the process of digital textile printing.

Minor inclusions such as ink spots, water marks, loose threads, slubs, wavy lines, thread rotation and surface lint within the printed area will be considered as acceptable by Quality Control. We will not approve any print that we consider contains large inclusions. These will have been rejected and reprinted prior to dispatch.

The Silk Bureau Ltd will always endeavour to produce printed fabrics of the highest quality but cannot be held responsible for any weave quality issues that originate with our suppliers. Any irregularities and variations in the weave of our fabrics are not to be considered as defects. They are characteristics of a natural fibre.

Please examine the fabrics carefully before processing your scarves. Direct or indirect claims for any reason whatsoever will not be accepted once the customer, or any party acting upon their instructions, has cut, or processed the fabric in any way. Claims for any defects, or shortages, must be made in writing within seven days of delivery of the fabric.

Printing Scarves


The processes involved in digital textile printing causes the original fabric to shrink. If you are printing scarves, the size of the finished product will be important to you. For example, if you have square artwork, you will be expecting your finished scarf to be square!

To get the printed fabric closer to the size you need, all fabric intended for scarves must go through an extra step to reshape it. Please allow extra time on your deadlines to allow for this process. 

Let us introduce you to the …


The stenter is an enormous piece of machinery that has many uses, including coating our fabrics and reshaping scarf orders.

After travelling through a solution to soften the fabric, it then passes over a flat bed, gripped on the selvedge edges to pull it back into shape. 

It’s a long and precise process that needs to be carefully monitored.

Shrinkage Disclaimer

If you have selected to use our hemming service, we will check the stentered fabric for you before we begin to finish your scarves. If you are not using our service, it’s up to you to check the size BEFORE you cut out the individual scarves from the fabric length. We cannot re-size after your scarves have been cut out.